Understanding Your Circuit Breaker Box
A circuit breaker box, electrical service panel, or load center are all terms which refer to the same thing: the metal box which distributes the power to different areas of your home. It contains the circuit breakers which protect the wiring in each of these areas from an overload situation. Here are some facts about your breaker box which may give you a basic understanding of it:
How it works
The Main breaker switch will be located in or on the box or meter.
The function of your circuit breaker box is to regulate the amount of power coming into your home and where it goes safely. If a homeowner tries to plug in too many electrical appliances, or there is a short, the circuit breaker ‘trips’ and the power is cut, which saves the wiring, delicate electronic devices, and appliances from frying.
The main breaker
The main breaker feeds the power to each of the circuits and protects them by limiting the amount of power coming in. If there isn’t a main breaker in your electrical service panel, it may be located near the meter. It is imperative that you find it and everyone in the household knows how to shut the power off in the event of an emergency, such as a flood or leaking roof.
Size and load
Breaker boxes are designated by both the amount of power (amps) they handle and the number of breakers they are designed to handle.
Because electrical current passes from the power company’s generator plant, through a transformer to the meter and then to the homeowner’s service box, and then through the wires to different outlets and switches, there are many places where a failure in the system could occur. That’s what makes troubleshooting a challenge.
The breakers
Circuit breakers come in different types. A single pole type is designed to handle 120 volts. A double pole is designed to handle 240 volts, typically needed for water heaters and other heavy appliances.
Circuit breakers are designed to operate at 80% of their capacity. So, to plan for having a breaker box with enough amps and circuit breakers to handle your home electrical needs, your electrician will use the formula watts divided by volts = amps to calculate your needs.
Bigger is now normal
Even though some breaker boxes in older homes are only 60 amps, the minimum standard is now 100. Many people find they are more comfortable with 150. The cost of replacing your existing breaker box with a similar model or an upgrade will depend on the conditions your electrician encounters in your home.
As society responds to technology with more and greater electronics, some homeowners find their power needs are higher than their electrical service box can safely handle. Even though computers use less power than they used to and even flat screen televisions use less electricity than the older models, some people are just using more appliances, electric cars, etc. Nonetheless, everyone's needs/households are different, and a good electrician will respect that.
Zimmerman Electric is here to serve your residential and commercial electrical needs throughout the Phoenix Valley metro area. Call us today if you need electrical work performed 602-497-3365.
